PN10 bar low pressure PP-H plastic swing check valve,1/2" to 12"

swing check valve is a butterfly-style check valve in which the disc, the movable part to block the flow, swings on a hinge or trunnion, either onto the seat to block reverse flow or off the seat to allow forward flow. the valve shut off depends on gravity (weight of disc) and reverse flow. The pivot point of the swing check is outside the periphery of the disc and, the greater the head, the greater the possibility that the fluid will flow back through the valve before the disc can shut off. To effect complete shut off, the disc of a swing check valve must travel through a 90 angle arc to the swing check valve seat.

PP-H (Beta-PP BE60-7032) is a HMW and low melt flow rate HOPP, by β modification, it has delicate crystal structure, which make it excellent impact strength at low temperature, it also improve the  hydrolic pressure, corrosion resist property, working temperature, and lower the expansion coefficient

FEATURES
• Sizes from 1/2” to 12”.
• All PP-H body.
• EPDM seal.
• working temperature from -14 to 95.
• working pressure PN10 bar.
• Minimum flow resistance, low pressure drop.
• Horizontal installation.
• Top access cover facilitates maintenance without body removal from pipeline.
• ANSI,JIS,DIN flange connection
• Minimum back pressure to seat disc tightly.

APPLICATION AREA

• acid pickling piping line
• electroplating liquid carrying.
• pharmaceutical factory acid and carrying.
• oil and gas industrial.
• textile mill,Leather Factory acid piping line.
• mining plant, metallurgy plant, fertilizer plant waste liquid piping line.
• semiconductor water treatment piping line.
• waste water treatment piping line
• food industrial salt water piping line
• chlorine plant